Table Tennis Blade Types Explained: What Really Changes Your Shot (2026)

Black table tennis racket and ball on a dark table
In This Article
  1. What Are the Main Table Tennis Blade Types?
  2. Blade Speed Classes: DEF to OFF+
  3. All-Wood vs Carbon and Composite Blades
  4. Number of Plies: 1, 3, 5, 7 and Beyond
  5. Wood Types: Limba, Koto, Hinoki and Ayous
  6. Blade Weight and Thickness
  7. Handle Shapes: Shakehand and Penhold
  8. How to Choose a Blade by Style and Level
  9. Pre-Made Paddles vs Custom Blades
  10. Frequently Asked Questions

What Are the Main Table Tennis Blade Types?

Table tennis blades are sorted in four ways: by speed class (DEF, ALL, OFF-, OFF, OFF+), by material (all-wood or wood plus carbon or another composite), by construction (number of plies and where composite layers sit) and by handle (flared, straight, anatomic or a penhold shape). Most players are best served by a five-ply all-wood ALL or OFF- blade first, moving to faster or carbon blades only once their strokes are consistent.

The blade is the wooden frame under the rubbers, and it sets the basic character of the whole racket: how fast the ball leaves it, how much you feel on contact and how long the ball stays on the surface. Rubbers can push that character in one direction or another (our guide to table tennis rubber types covers that side), but they cannot turn a slow defensive blade into a power weapon.

Quick Facts

  • Legal size, shape, weight: Any, but the blade must be flat and rigid (ITTF Law 2.4.1)
  • Natural wood: At least 85% of the blade's thickness
  • Composite layers: Max 7.5% of total thickness or 0.35 mm, whichever is smaller
  • Common plies: 5 or 7 wood plies; "5+2" means five wood plus two composite
  • Typical weight: Roughly 80–95 g for popular shakehand blades, before rubbers
  • Typical thickness: About 5.5–7 mm for multi-ply blades; single-ply Japanese hinoki blades can reach 10 mm

Blade Speed Classes: DEF to OFF+

Almost every manufacturer labels blades with a speed class. The labels are not standardized, so one brand's OFF can feel close to another brand's OFF-, but the order is always the same, from slowest to fastest:

ClassMeaningHow It PlaysWho It Suits
DEFDefensiveSlowest, soft and flexible, often a larger headChoppers and long pips defenders
ALL / ALL+AllroundModerate speed, high controlBeginners, improvers, control players
OFF-Offensive minusAttacking blade with a forgiving edgeDeveloping loopers, offensive allrounders
OFFOffensiveFast and fairly stiffEstablished attackers
OFF+Offensive plusFastest, stiffest, least margin for errorAdvanced players with strong footwork

Some brands go further and publish a number instead of a label. Butterfly, for example, lists a reaction value (its measure of a blade's base speed) and a vibration value (how the blade feels on impact, where lower means a softer touch). These numbers only compare blades within the same brand, but they show the speed classes clearly:

Butterfly Reaction Rating by Blade, Higher = Faster (source: Butterfly blade specifications)
Primorac (5-ply wood)9.7
Petr Korbel (5-ply wood)10.6
Innerforce Layer ALC (inner carbon)10.7
Korbel SK7 (7-ply wood)11.1
Viscaria (outer ALC)11.8
Primorac Carbon (3-ply + 2 carbon)12.5
Cypress G-Max S (1-ply hinoki)13.6

Notice how construction, not just material, changes speed: the seven-ply all-wood Korbel SK7 is quicker than the inner-carbon Innerforce Layer ALC, and a single thick slab of hinoki tops the chart.

Tip: The most common blade mistake is buying one or two classes too fast. Speed you cannot control turns into balls off the end of the table, not winners.

All-Wood vs Carbon and Composite Blades

Green table with a racket and ball in a training room

The biggest split in blade types is material. ITTF Law 2.4.2 requires at least 85% of the blade by thickness to be natural wood, but an adhesive layer may be reinforced with fibrous material such as carbon fiber, glass fiber or compressed paper, as long as it is no thicker than 7.5% of the total thickness or 0.35 mm, whichever is smaller. That thin layer still makes a big difference.

All-Wood Blades

All-wood blades are built entirely from wood veneers. They flex more on contact, so the ball sinks in slightly and stays on the racket a fraction longer (dwell time). That gives you more feel, easier spin on slow strokes and better control for pushes, blocks and short touch play. The trade-off is less raw speed and a smaller sweet spot. Classic examples include the Butterfly Primorac and Petr Korbel and the seven-ply STIGA Clipper.

Carbon and Composite Blades

Adding composite layers makes a blade stiffer and faster, enlarges the sweet spot and usually reduces vibration feedback. Common materials include:

  • Carbon: plain carbon fiber, the fastest and stiffest feel in most lineups.
  • ALC (Arylate-Carbon): carbon woven with arylate fiber, generally described as softer-feeling than plain carbon. Used in the Viscaria, Timo Boll ALC and Fan Zhendong ALC.
  • ZLC (ZL Carbon): Butterfly's Zylon-based weave, an alternative to ALC. Butterfly rates the Innerforce Layer ZLC at 10.5 for reaction against 10.7 for the ALC version, so the two are close.
  • Glass fiber and other fibers: used by several brands to add stiffness with a softer feel than carbon.

Inner vs Outer Composite Layers (Innerforce)

Where the composite sits matters as much as what it is. In an outer (outer fiber) layout, the two composite layers sit just under the face veneers, so the ball reacts with the stiff fiber almost immediately. That gives a fast, direct, powerful feel. In an inner layout, which Butterfly sells under the Innerforce name, the composite sits deeper, next to the core, so the outer wood plies flex first and the blade feels closer to all-wood.

Butterfly's own figures show the effect. The outer-ALC Viscaria is rated 11.8 for reaction and 10.3 for vibration; the Innerforce Layer ALC, with the same 5-ply plus 2 ALC recipe moved inward, is rated 10.7 and 9.4. In plain terms: a little slower, a little softer, more forgiving.

ConstructionSpeedFeelSweet SpotBest For
5-ply all-woodLow to mediumMost feedbackSmallerBeginners, control and spin players
7-ply all-woodMedium to highFirm, solidMediumHitters and penhold attackers
Inner composite (e.g., Innerforce)Medium to highWood-like with extra popLargerIntermediate loopers moving up from wood
Outer composite (ALC, ZLC, carbon)High to very highStiff, directLargestAdvanced attackers, mid-distance power

These are general tendencies; individual blades vary. For specific models in each group, see our list of the best table tennis blades.

Number of Plies: 1, 3, 5, 7 and Beyond

A ply is one layer of the laminate. More plies does not simply mean faster; the thickness and hardness of each layer matter too. As a rough guide:

  • 1-ply: a single solid slab, almost always hinoki and almost always a Japanese penhold blade. Butterfly's Cypress G-Max S is 1-ply Kiso hinoki at a listed 10.0 mm thick.
  • 3-ply: rare in all-wood form today; more common as a thin wood base for composite blades such as the Primorac Carbon (3-ply plus 2 carbon layers).
  • 5-ply: the most common build. Flexible, good dwell time and feedback, from DEF to OFF depending on the woods.
  • 7-ply: stiffer and thicker, with more power for flat hitting and blocking. Popular with Chinese-style attackers and penholders.
  • 5+2 or 7+2: wood plies plus two composite layers, the standard notation for carbon and ALC blades.

Some specialist blades use more plies, such as nine or more thin layers, but these are niche choices rather than a separate type.

Wood Types: Limba, Koto, Hinoki and Ayous

Sunny courtyard with an outdoor table tennis table

The outer veneer, or face ply, is what the rubber sits on, and it shapes the feel more than any inner layer. The four woods you will see most often:

WoodUsually Used AsCharacter
LimbaOuter plySoft and flexible; good feel and spin potential, a classic all-wood choice
KotoOuter plyHarder and crisper; a faster, more direct rebound
HinokiOuter ply or single-ply bladeJapanese cypress; balances a soft touch with high speed
AyousCore (center) plyLight, soft wood that keeps blades thick without making them heavy

The typical recipe is a soft outer wood such as limba over medium inner plies and a thicker ayous core. Swap the limba for koto and the same blade becomes crisper and quicker; add a thin hinoki face and it gets a lively, slightly softer touch. Exact recipes are often not published, so read the maker's description rather than guessing from the name.

Blade Weight and Thickness

Weight

Blade weights vary even within one model because wood is a natural material; Butterfly notes that weight changes with humidity and temperature. Its listed averages for popular shakehand blades run from about 84 g (Primorac, Timo Boll ALC) to 96 g (Diode V). Two inverted rubbers with sponge add considerably more on top, so a heavy blade can produce a tiring racket.

  • Heavier blades (about 90 g and up): more stability and plow-through on loops and blocks, slower in quick exchanges.
  • Lighter blades (low 80s): faster hands close to the table, less mass behind the ball.

Thickness

Thicker blades are generally stiffer and faster; thinner ones flex more. Butterfly lists the Primorac at 5.5 mm, the Viscaria at 5.8 mm, the Innerforce Layer ALC at 6.0 mm, the seven-ply Korbel SK7 at 6.8 mm and its single-ply hinoki Cypress blades at 10.0 mm.

Handle Shapes: Shakehand and Penhold

Shakehand Handles

  • Flared (FL): widens toward the end so the racket does not slide out of your hand on big swings. The most popular handle.
  • Straight (ST): the same width from top to bottom. Easy to adjust your grip between forehand and backhand, which is why many defenders like it.
  • Anatomic (AN): bulges in the middle to fill the palm.

Handle choice is mostly comfort. If you can, hold a few before buying; a handle that feels wrong will bother you more than a small difference in speed.

Chinese Penhold (CS)

Chinese penhold blades use a shorter handle on a head shaped much like a shakehand blade, which allows the reverse penhold backhand used by modern Chinese penholders. Many popular shakehand blades, including the Viscaria, Fan Zhendong ALC and Innerforce Layer ALC, are also sold in CS versions.

Japanese and Korean Penhold

Japanese and Korean penhold blades usually have a more squared or rectangular head and a handle with a raised block, usually cork, for the index finger. They are traditionally designed for one-sided play, which is why thick single-ply hinoki is so common here. For a full breakdown of how each grip works, see our guide to table tennis grips.

How to Choose a Blade by Style and Level

Two people playing table tennis outdoors under trees

Choose the blade for how you play now, not how you hope to play in two years. A sensible path for most players:

  1. Beginner. Five-ply all-wood, ALL or ALL+, medium weight, flared handle. You will learn spin and control faster, and good technique carries over to any faster blade later.
  2. Improving attacker. OFF- all-wood or an inner-composite blade. Enough speed to finish points, still forgiving on loops and blocks.
  3. Advanced looper. OFF or OFF+ with outer ALC, ZLC or carbon, if your footwork and swing speed can handle it. This is where most elite attackers end up.
  4. Close-to-table hitter. A stiffer seven-ply all-wood or outer-composite blade for direct, flat power.
  5. Chopper or long pips defender. DEF blade, often with a larger head and straight handle, so pips and chops stay low and controlled.
  6. Penholder. A CS blade for Chinese style, or a Japanese/Korean penhold blade (often single-ply hinoki) for one-sided play.

Then match rubbers to the blade. A fast composite blade usually pairs better with a slightly more controllable rubber, while an all-wood blade can take a livelier sheet; see the best table tennis rubber for options, and our Tenergy 05 review if you are considering the classic tensor benchmark.

Watch Out: Copying a world champion's blade rarely helps. Pros pair fast blades with elite footwork and swing speed. A slower version from the same family is usually the better match for club play.

Pre-Made Paddles vs Custom Blades

You can buy a blade two ways: already assembled with rubbers as a pre-made paddle, or as a bare blade that you combine with rubbers of your choice.

Pre-Made Paddles

  • Ready to play, no gluing
  • Budget to mid-range price tiers
  • Blade type often only loosely described (for example "7-ply" or "carbon")
  • Rubbers are not always ITTF-authorized, so check before entering sanctioned events

Custom Blade Plus Rubbers

  • You choose speed class, plies, composite and handle exactly
  • Different rubbers on each side, tuned to forehand and backhand
  • Rubbers can be replaced while the blade lasts much longer
  • More expensive and needs table tennis glue to assemble

For casual and early club play, a good pre-made racket is fine; our list of the best ping pong paddles covers those. Once you know your style, a custom setup lets you pick the exact blade type described here. Our guide to custom ping pong paddles explains how to build one, and a paddle case protects the wood and rubber afterward.

Did You Know? The ITTF keeps an authorized list for rubber coverings but not for blades. Any blade that is flat, rigid and meets the wood and composite limits is legal for sanctioned play, whatever its size, shape or weight.

Frequently Asked Questions

Is a Carbon Blade Better Than an All-Wood Blade?

Not automatically. Carbon adds speed, stiffness and a larger sweet spot, but it also cuts feedback and dwell time. All-wood blades are usually easier to control and better for learning technique, while carbon suits players whose strokes are already consistent.

How Many Plies Should a Beginner's Blade Have?

A five-ply all-wood blade in the ALL or ALL+ speed class is the standard starting point. It is flexible enough to hold the ball for a moment, which makes spin and control easier while strokes are still developing.

What Is the Difference Between ALC and ZLC?

Both are composite fibers woven with carbon. ALC is Arylate-Carbon and ZLC is Butterfly's Zylon-based ZL Carbon. They play similarly in the same layout; Butterfly's own figures show only small differences between ALC and ZLC versions of a blade, so the layout and woods matter more than the fiber name.

Can a Penhold Player Use a Shakehand Blade?

Some Chinese-style penholders do, but most use a penhold version with a shorter handle so the fingers can wrap the blade comfortably. Japanese penhold blades have a different head shape and handle and are not interchangeable with shakehand models.

How Heavy Should a Table Tennis Blade Be?

Most popular shakehand blades weigh roughly 80 to 95 grams before rubbers. Heavier blades feel more stable and powerful, lighter ones are quicker to move. Remember that two sponge rubbers add a lot more weight on top.

Do Table Tennis Blades Need ITTF Approval?

No. The ITTF publishes an authorized list for rubber coverings, not for blades. A blade is legal for sanctioned play as long as it meets the racket laws: flat and rigid, at least 85 percent natural wood by thickness, and composite layers no thicker than 7.5 percent of the total or 0.35 mm, whichever is smaller.

Sources and References